Modeling an Optoelectronic System Which Includes One Led and One Photodiode

Erdem ÖZÜTÜRK
2.292 607

Abstract


In this study, the model relations of an optoelectronic system which include a LED and a photodiode which are connected with the information of light have been obtained. The voltage which measured from the anode of photodiode is used as proportional value with radiant power of LED. Because of using this value as model parameter instead of radiant power, all the magnitudes that used in the model relations are electrical magnitudes. The system equation can be expended by adding the information of optical medium that the light has been passed through, if it necessary.

Keywords


LED; modeling; photodiode

Full Text:

PDF


DOI: http://dx.doi.org/10.17482/uujfe.72941

References


Ozuturk E. (2013) Formulation of The LED's Radiant Power-Current Characteristic at Pulsed High Currents, Optik - International Journal for Light and Electron Optics, 124, 3549-3553.

Ozuturk E. (2000) The Theoretical and Practical Research of LED Operation at Pulsed Excess High Currents, PhD, Uludag University, Bursa, Turkey.

Ozuturk E. (2002) LED’in Darbeli Aşırı Akımda Bazı Davranışlarının İncelenmesi, Dokuz Eylul University Engineering Faculty Journal of Engineering Sciences, 4,19- 35.

Bradbury D. (1991) Shedding Light on Opto-Electronics, Electronics World + Wireless World, November, 911-915.

Ozuturk E. (2006) LED’in Elektriksel 147 Karakteristiklerinin Optik Karakteristikleri Üzerindeki Etkilerinin İncelenmesi, Pamukkale University Engineering College Journal of Engineering Sciences, 12, 389-396.

Ozuturk E. (2006) LED Işığının Algılanabilme Uzaklığını Arttırma Olanaklarının Araştırılması, Erciyes University Journal of The Institute of Science and Technology, 22(1-2), 83-96.

Wilson J, Hawkes J.F.B. (2000) Optoelektronik, Değişim Yayınları, 2. Edition, Adapazarı, 518.




Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.