Technical and Economical Comparison of Plate, Shell and Tube and Miniature Pipe Type Heat Exchangers

Ahmet Serhan CANBOLAT, Burak TURKAN, Akın Burak ETEMOGLU, Muhiddin CAN, Atakan AVCI
1.076 1.193

Abstract


Heat exchangers are devices which facilitate the exchange of heat between two fluids that are different temperatures in engineering applications. Heat exchangers are commonly used in practice in a wide range of applications such as space heating and air conditioning, power production, waste heat recovery and chemical processing engineering. In this study, plate, shell and tube and multiple mini-tube type heat exchangers for the same heat capacity, with the same hot and cold water inlet and outlet temperatures and the same hot and cold water mass flow rates are compared with the technical and economical point of view respectively. When the evaluation criteria is cost; multiple mini tube type heat exchanger is the most economic choise in comparison the other exchangers in long term. However, due to the different usage areas, different choices may be done.


Keywords


Heat Exchanger; plate type; shell and tube type; multiple mini-tube type

Full Text:

PDF (Türkçe)


DOI: http://dx.doi.org/10.17482/uujfe.73603

References


Bayraktar, İ., Parmaksızoğlu, C. 1997. Gövde Boru Ve Serpantin Tipi Isı Değiştiricilerinin Tasarımı, 3. Ulusal Tesisat Müh. Kongresi ve Sergisi.

Çengel, Y.A. 2011. Isı ve Kütle Transferine Pratik Bir Yaklaşım, 3.Basım, Güven Kitabevi, İzmir.

Etemoğlu, A.B., Can, M., Ulcay, Y. 2006. Endüstriyel Atık Akışkanların Ülke Ekonomisine Katkısının İrdelenmesi, Standard Dergisi, 62-69, TSE, Ankara.

Genceli, O.F. 1999. Isı Değiştiricileri, Birsen Yayınevi, İstanbul.

Incropera, F.P., Dewitt, D.P. 2001. Isı ve Kütle Geçişinin Temelleri, Literatür Yayıncılık, İstanbul, 880 s.

Kakaç, S. 2012. Heat Exchangers: Selection, Rating and Thermal Design, Third Edition, CRC Press, Taylor Francis Group, USA.

Kayansayan, N. 1983. Isı Eşanjörleri (Teori ve Dizayn), Dokuz Eylül Üniversitesi Müh. Mim. Fak. Yayın No:35,İzmir.

Pulat, E., Etemoğlu, A.B., Can, M. 2009. Waste-heat recovery potential in Turkish Textile Industry : Case Study for City of Bursa, Renewable and Sustainable Energy Reviews 13, 663-672, doi:10.1016/j.rser.2007.10.002

Shah, R.K., Sekulic, D.P. 2003. Fundamentals of Heat Exchanger Design, USA, New Jersey.

Terrones, M. 2003. Science and Technology of The Twenty First Century, Synthesis, Properties and Applications of Carbon Nanotubes Annual Review of Materials Research, Vol 33, 419-501, doi: 10.1146/annurev.matsci.33.012802.100255




Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.